[Sticky] Xerox Repair Service USA

Hello brian123,

You should try these steps to avoid the scanning issue with your Xerox C235 Color Multifunction Printer:

• Make sure that you place the original to be scanned face down on the document glass, or face up in the automatic document feeder.
• Validate that the scanner is set up properly.
• Clarify that the printer wire is correctly attached.
• Check to see if the printer cable is in working order. Replace the cable with an established excellent cable. In case of need, switch out the cable.

If the problem continues, you must get in touch with the authorized Repair Service Center in the USA. You will need to input your area code to get the best Apple Repair Service Center nearby, it’s finally done! You can either call the number listed on the URL I provided above, or you can go directly to their location and explain the problem you are having and get it fixed. 

Hello Jeff, you're doing well!

The easiest solution to getting your Xerox 5018 Copier fixed is to restart it. If that doesn't work, turn off your printer for a few minutes before switching it back on.

You may have previously tried this enormously popular technique, which can sometimes fix minor issues with your device. However, if the issue is still present, your copier is likely experiencing a serious malfunction and requires immediate assistance from a certified Repair Service Center.

The certified specialists at the Xerox Repair Service Center are prepared to get your gadget working. They have a wealth of knowledge and actively listen to the customer's needs in order to fix problems with all Xerox equipment

Hello Vishakha,

The following are the main causes of paper jams that you should think about so that you can appropriately fix them.

• The paper is unsupported.
• The driver's or tray's incorrect paper settings.
• Misleadingly loaded paper
• Improperly adjusted paper edge guides in the tray.
• Paper storage and poor condition or humidity.

The previously stated details will assist you in identifying your areas of blunder. If you can still not resolve the problem, you must approach the vicinity Repair Service Center for quick assistance. Using your city or state code, you may find the best Xerox Repair Service Center near you.

The technician at the repair service center provides all repairs and assistance that will ultimately help your device's dependability and operating efficiency.

Hello,

The procedures I've outlined here will help you set up or configure the address book. Most likely, this will take care of all the problems you are having.

• Log in as the System Administrator when you access the Embedded Web
• In the Embedded Web Server, Designate Properties > Apps > Email > Setup.
• Select the “Address Books” tab to proceed.
• Click the “Edit” button to customize the settings that are saved on the device.
• Configure LDAP server settings, then click Edit next to “Network Address Book” to utilize it.
• Follow the guidelines on the screen to proceed.
• To save the changes, click the "Apply" button.

If the instructions above weren't helpful, go to this page and look for the nearest Xerox Repair Service Center. You must use your city/state code to conduct this. To provide their services, the experts use cutting-edge tools and technology while working with a highly skilled crew. So you may trust them and get your problem fixed quickly.